Recherche - HESAM Université - Communauté d'universités et d'établissements Hautes écoles Sorbonne Arts et métiers université

Filtrer vos résultats

218 résultats
Image document

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality : durability and mechanical properties of thermally modified wood

Kevin Candelier , Simon Hannouz , M. Elaieb , Robert Collet , S. Dumarçay , et al.
MADERAS: Ciencia y Tecnología, 2015, 17 (2), pp.10. ⟨10.4067/S0718-221X2015005000024⟩
Article dans une revue hal-01059242v1
Image document

Modélisation des efforts de coupe en taillage d'engrenages à la fraise-mère

Naoual Sabkhi , Mohammed Nouari , Abdelhadi Moufki , Cyril Pelaingre , Claude Barlier
22ème Congrès français de mécanique, Association française de mécanique; Georges Jacquet-Richardet Aug 2015, Lyon, France
Communication dans un congrès hal-01449482v1

Virtual Reality and Recommendation System to Design Mobility System

Alex Gabriel , Mario Ortiz
2017 13th International Conference on Signal-Image Technology & Internet-Based Systems (SITIS), Dec 2017, Jaipur, India. pp.490-495, ⟨10.1109/SITIS.2017.86⟩
Communication dans un congrès hal-03066106v1

Enhancement of heat exchanges on a condenser using an air flow containing water droplets

Pascal Boulet , Julien Tissot , F. Trinquet , L. Fournaison
Applied Thermal Engineering, 2013, 50 (1), pp.1164 - 1173. ⟨10.1016/j.applthermaleng.2012.08.039⟩
Article dans une revue istex hal-01427474v1
Image document

Contribution à l'étude expérimentale et à la modélisation de l'usinage des pièces de grandes dimensions : application au cas du taillage de dentures à la fraise-mère

Naoual Sabkhi
Autre. Université de Lorraine, 2015. Français. ⟨NNT : 2015LORR0261⟩
Thèse tel-01754546v1

Overall Size Optimization of a High-Speed Starter Using a Quasi-Z-Source Inverter

Jérémy Cuenot , Sami Zaim , Babak Nahid-Mobarakeh , Serge Pierfederici , Eric Monmasson , et al.
IEEE Transactions on Transportation Electrification, 2017, 3 (4), pp.891 - 900. ⟨10.1109/TTE.2017.2738022⟩
Article dans une revue hal-01733272v1

The TreeTrace Douglas database: quality assessment and traceability of Douglas fir

Fleur Longuetaud , Guillaume Pot , Frédéric Mothe , Alexis Barthelemy , Rémi Decelle , et al.
3rd ECCOMAS Thematic Conference on Computational Methods in Wood Mechanics (CompWood 2023), Sep 2023, Dresden (GERMANY), Germany
Communication dans un congrès hal-04681588v1
Image document

ICE Breaking: Disentangling Factors Affecting the Performance of Immersive Co-creation Environments

Marc Pallot , Laurent Dupont , Olivier Christmann , Vincent Boly , Richir Simon , et al.
Laval Virtual - Virtual Reality International Congress (VRIC) '17, Mar 2017, Laval, France. ⟨10.1145/3110292.3110316⟩
Communication dans un congrès hal-01723989v1
Image document

Identification des propriétés effectives d’élasticité d’un polymère obtenu par fabrication additive SLS à partir d’une modélisation du volume élémentaire représentatif

B Haddag , I Benchikh , Mohammed Nouari , H Makich , Michel Bornert , et al.
Congrès Francais de Mécanique, Aug 2019, Brest, France
Communication dans un congrès hal-03375717v1
Image document

Experimental determination and modelling of high-pressure phase behavior for the binary system CO2 + cyclooctane

Stéphane Vitu , Andrés Piña-Martinez , Romain Privat , Marie Debacq , Jean-Louis Havet , et al.
Journal of Supercritical Fluids, 2021, 174, pp.105249. ⟨10.1016/j.supflu.2021.105249⟩
Article dans une revue hal-03200830v1

Local elastic properties characterization of the temporo-mandibular joint disc through macro-indentation

Lk. Tappert , Adrien Baldit , R. Rahouadj , P. Lipinski
Computer Methods in Biomechanics and Biomedical Engineering, 2017, 20 (sup1), pp.S201-S202. ⟨10.1080/10255842.2017.1382932⟩
Article dans une revue hal-03283003v1
Image document

The effect of log heating temperature on the peeling process and veneer quality: beech, birch, and spruce case studies

Anna Dupleix , Louis Denaud , Laurent Bléron , Rémy Marchal , Mark Hughes
European Journal of Wood and Wood Products, 2013, 71 (2), pp.163-171. ⟨10.1007/s00107-012-0656-1⟩
Article dans une revue hal-00844668v2

Utilization of temperature kinetics as a method to predict treatment intensity and corresponding treated wood quality: durability and mechanical properties of thermally modified wood

Kévin Candelier , Simon Hannouz , Mohamed Tahar Elaieb , R. Collet , Stéphane Dumarcay , et al.
MADERAS: Ciencia y Tecnología, 2015, 17 (2), pp.253-262. ⟨10.4067/S0718-221X2015005000024⟩
Article dans une revue hal-02059423v1
Image document

MANITOO : Solveur Orienté Objet d'Equations Non Linéaires par Méthode Asymptotique Numérique

A Lejeune , Fabien Béchet , H Boudaoud , Y Gaillard , N Mathieu , et al.
CSMA 2019, May 2019, Giens, France
Communication dans un congrès hal-03237549v1

Real‐time Raman spectroscopy measurements to monitor the effect of polypropylene crosslinking on its true mechanical behaviour

Adrien Letoffe , Marc Ponçot , Thomas Huchard , Sebastien Hupont , Sandrine Hoppe , et al.
Journal of Raman Spectroscopy, 2021, 52 (8), pp.1473-1485. ⟨10.1002/jrs.6146⟩
Article dans une revue obspm-03586433v1

Modeling of velocity-dependent chip flow angle and experimental analysis when machining 304L austenitic stainless steel with groove coated-carbide tools

Fousseny Koné , Christophe Czarnota , Badis Haddag , Mohammed Nouari
Journal of Materials Processing Technology, 2013, 213 (7), pp.1166 - 1178. ⟨10.1016/j.jmatprotec.2013.01.015⟩
Article dans une revue istex hal-01430698v1

Modeling and Simulation of a Series Hybrid Propulsion Chain for Small Ships

Nacera Bennabi , Hocine Menana , Jean-Frederic Charpentier , Jean-Yves Billard , Benoit Nottelet
IEEE VPPC'2017 - The 14th IEEE Vehicle Power and Propulsion Conference, Dec 2017, Belfort, France
Communication dans un congrès hal-03212782v1
Image document

Resistance of thermally modified ash (Fraxinus excelsior L.) wood under steam pressure against rot fungi, soil-inhabiting micro-organisms and termites

Kévin Candelier , Simon Hannouz , Marie-France Thévenon , Daniel Guibal , Philippe Gerardin , et al.
European Journal of Wood and Wood Products, 2017, 75 (2), pp.249-262. ⟨10.1007/s00107-016-1126-y⟩
Article dans une revue hal-02179527v1

Analysis of Nonlinear Wave Propagation in Hyperelastic Network Materials

Hilal Reda , Khaled Elnady , Jean-François Ganghoffer , Nikolas Karathanasopoulos , Yosra Rahali , et al.
Generalized Models and Non-classical Approaches in Complex Materials, Springer, pp.185-200, 2018, 978-3-030-08471-4. ⟨10.1007/978-3-319-77504-3_9⟩
Chapitre d'ouvrage hal-03311716v1

Thermal-electrical-mechanical simulation of the nickel densification by Spark Plasma Sintering. Comparison with experiments

Cyprien Wolff , Sébastien Mercier , Hervé Couque , Alain Molinari , Frédéric Bernard , et al.
Mechanics of Materials, 2016, 100, pp.126-147. ⟨10.1016/j.mechmat.2016.06.012⟩
Article dans une revue hal-03225688v1
Image document

Effect of Microstructural and Physical Mechanisms on Mechanical Properties of Single-Phase Steels

Gérald Franz , Farid Abed-Meraim , Tarak Ben Zineb
Advanced Science Letters, 2013, 19 (1), pp.346-350. ⟨10.1166/asl.2013.4710⟩
Article dans une revue hal-01427473v1
Image document

Vers une méthode de conception HYGRO-thermique des BATiments performants : démarche du projet HYGRO-BAT

Monika Woloszyn , Nolwenn Le Pierrès , Yannick Kedowidé , Joseph Virgone , Abdelkrim Trabelsi , et al.
IBPSA France 2014, May 2014, Arras, France. pp.8
Communication dans un congrès hal-00995281v1

Multiscale Computational Models of the Influence of Mechanobiological Stimuli on Bone Remodeling

Ibrahim Goda , Zineeddine Louna , Jean-François Ganghoffer
Stem Cells and Regenerative Medicine, 80, IOS Press, pp.74-80, 2021, 978-1-64368-026-2 || 978-1-64368-027-9. ⟨10.3233/bhr210013⟩
Chapitre d'ouvrage hal-03483377v1

Interaction between the local tribological conditions at the tool–chip interface and the thermomechanical process in the primary shear zone when dry machining the aluminum alloy AA2024–T351

S. Atlati , A. Moufki , Mohammed Nouari , B. Haddag
Tribology International, 2017, 105, pp.326-333. ⟨10.1016/j.triboint.2016.10.006⟩
Article dans une revue hal-03325727v1

Mechanistic approach applied to the gear hobbing process

Naoual Sabkhi , Mohammed Nouari , Abdelhadi Moufki
Advances in Materials and Processing Technologies, 2016, 3 (1), pp.45-51. ⟨10.1080/2374068X.2016.1247251⟩
Article dans une revue hal-03325713v1

Vibration modeling of large repetitive sandwich structures with viscoelastic core

Komla Gaboutou Lougou , Hakim Boudaoud , El Mostafa Daya , Lahcen Azrar
Mechanics of Advanced Materials and Structures, 2016, 23 (4), pp.458-466. ⟨10.1080/15376494.2014.984095⟩
Article dans une revue hal-01514954v1
Image document

Comparison of classical beam theory and finite element modelling of timber from fibre orientation data according to knot position and loading type

Guillaume Pot , Robin Duriot , Stéphane Girardon , Joffrey Viguier , Louis Denaud
European Journal of Wood and Wood Products, 2024, ⟨10.1007/s00107-024-02055-5⟩
Article dans une revue hal-04521939v1

Optimal thickness of porous micro-electrodes operating a single reduction reaction

Tien Dung Le , Didier Lasseux , Alexander Kuhn , Nicolas Mano , Gérard L. Vignoles
11th International Conference of the International Society for Porous Media INTERPORE 2019, May 2019, Valencia, Spain
Communication dans un congrès hal-02398612v1

Application de la Thermodynamique en Dimensions Finies à l’analyse des performances d’un thermogénérateur électrique

Yuxian Dong , El-Bakkali Amin , Michel Feidt , Georges Descombes , Christelle Périlhon
COFRET 2012 Sozopol., Jun 2012, SOZOPOL, Bulgarie
Communication dans un congrès hal-01498971v1

A Statistical Study of Metatarsal Anatomy: Toward the Design of Wide-Range Prosthetic Solutions

Yohann Couqueberg , Romain Augoyard , Marc Augoyard , Valérie Berry-Kromer , Céline Bouby , et al.
Foot & Ankle Specialist, 2018, 11 (3), pp.277-287. ⟨10.1177/1938640017744639⟩
Article dans une revue hal-03223659v1